Laser Pipe Cutting Machine

A servo-controlled support system holds every pipe at the exact concentric point of the chuck — nationwide service, installation, and training included.

  • USA Service
  • Free Installation
  • Training Included
  • Trusted Guidance
  • Manufacturing Experts

Our Laser Pipe Cutting Machine Is Trusted Across The USA

700+ Installations

Fast Service Response Times

Financing Available

Serving North American Manufacturers

Why Choose A Laser Pipe Cutting Machine From Moore Machine Tools

Our servo-controlled cutting table allows the pipe to float up and down while firmly holding it to ensure precision cutting. The servo support system is automatically adjustable, producing optimal results when cutting different materials, and guarantees the pipe is set at the concentric point of the chuck — every time, on every job.

Precision Pipe Cutting, Job After Job

Three servo support devices work together to hold, float, and center every pipe as it cuts — keeping alignment consistent whether you’re running round pipe, tubing, or structural profiles.

Servo-Controlled Table

The servo-controlled cutting table allows the pipe to float up and down while firmly holding it in place, ensuring precision cutting from end to end.

Automatic Concentricity

The servo support system automatically adjusts to set every pipe at the exact concentric point of the chuck, producing optimal results across different materials.

Consistent Precision

From simple round pipe cuts to complex structural profiles and 3D intersections, the same unwavering precision holds up job after job.

Industries We Serve

Structural Fabrication

Structural steel fabrication facilities benefit directly from the improved cutting speeds, reduced secondary finishing time, and precision provided by the fiber laser cutting machine.

Shipbuilding

Large shipbuilding facilities commonly see a fast ROI, improved throughput, and lower cost per part when integrating a fiber laser cutting machine.

Transportation

The transportation fabrication industry benefits from the fiber laser cutting machine by providing faster time to completion for their customers.

With over 300 Reviews on Google, you don’t have to take our word for it.

Posted on Google Google
Julie Villanella profile picture
Julie Villanella
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great and courteous crew! Very knowledgeable and helpful with our setup!
Posted on Google Google
Dan Villanella profile picture
Dan Villanella
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
great installation team, very patient with crew, quality machine
Posted on Google Google
Eric Chant profile picture
Eric Chant
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Tanner was very nice to work with on the repair of our machine. I would highly recommend him in the future.
Posted on Google Google
Joel Carroll profile picture
Joel Carroll
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Brock and Trevor came out today and work on our press brake and they were really helpful and very respectful. They truly know there machines, thanks guys
Posted on Google Google
Michael Gerbers profile picture
Michael Gerbers
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
The shop I work at uses Moore to service our press brakes and they are fantastic to work with. Their customer service team is super friendly and helpful and their technicians are amazing. Tanner is always super helpful and makes himself available to call or video chat any time I run into an issue and they're great when they come for our yearly service. Cannot recommend them enough.
Posted on Google Google
Adrian Castaneda profile picture
Adrian Castaneda
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Moore Machine Tools was very knowledgeable and helpful on the setup of our new Accurl shear. Very good experience with this company.
Posted on Google Google
Jeremy Williams profile picture
Jeremy Williams
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Our company had a shear installed and these guys came out to get it operational for us. Their service and knowledge was very helpful! They did a great job showing us the ropes of the of the machine. Thank you Clint and Trevor!
Posted on Google Google
Edward Thompson profile picture
Edward Thompson
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Just had new Accrul brake installed, Technician went through everything we needed to know, we are very pleased with our experience. Thank you.
Posted on Google Google
Bryan Hall profile picture
Bryan Hall
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Brock our tech was the best. Showed us everything we needed to know to to run our new ACCURL press
Posted on Google Google
Luke Sutton Jr. profile picture
Luke Sutton Jr.
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Clint did a great job here at PPS! Thanks for everyone hard work and putting the customer first! All around good experience!
Verified by Trustindex
Trustindex verified badge is the Universal Symbol of Trust. Only the greatest companies can get the verified badge who has a review score above 4.5, based on customer reviews over the past 12 months. Read more

Laser Pipe Cutting Machine FAQ

A laser pipe cutting machine uses a fiber laser beam and a servo-controlled support system to cut round pipe, tubing, and structural profiles with precise, repeatable accuracy, from simple cuts to complex 3D intersections.

A servo-controlled cutting table allows the pipe to float up and down while firmly holding it in place. The servo support system automatically adjusts to set the pipe at the exact concentric point of the chuck for every cut.

Yes. The servo support system is automatically adjustable, producing optimal results when cutting different materials and pipe diameters without manual reconfiguration between jobs.

The Accurl platform offers a full range of material capacities up to 21.6″ round in size, with raw material lengths up to 30 feet, covering most pipe and tube cutting jobs.

Yes. Bevel cutting allows for complex 3D geometries and perfect weld preparations, cut directly on the machine without a secondary beveling station.

If a pipe isn’t held at the true center of the chuck, cuts can drift out of tolerance as the material rotates. Automatic concentricity control keeps every cut accurate regardless of minor variations in the raw material.

Fiber laser cutting demands clean, dry, stable compressed air. Moisture, oil, and contaminants in the air supply lead to inconsistent cuts, poor edge quality, and increased maintenance, so proper air treatment is essential.

The support system and cutting table are built to perform under heavy workloads and hold up over the long term, maintaining consistent alignment and precision through high-volume production.

Laser pipe cutting machines are used in structural steel fabrication, transportation, agricultural equipment manufacturing, and any operation that processes round pipe or tubing at volume.

Consider the pipe diameters and lengths you process most, whether you need bevel cutting, and your production volume. Moore Machine Tools works with each customer to configure the right support system and machine for their pipe cutting needs.

Ready For Precision Pipe Cutting?