Fiber Laser Cutting Machines

FIBER LASER CUTTING MACHINES

UP TO 50’ WITH CUSTOM CONFIGURATIONS

What is Fiber Laser Technology?

High capacity fiber lasers are made in the combination of two most creative and sophisticated laser technologies: effective optical fiber and semiconductor diodes. The lasers activate diode as the source of light to impel the active fiber. In the optical fiber, the laser ray is generated and then is relayed by flexible resistant wire. Quality active fibers and rare-earth ions are doped together facilitating high power generation of an extremely small core that efficiently produces powerful lasers of one kilowatt with superior beam quality. IPG undertakes a number of proprietary technology to produce consistent and powerful (kilowatts) fiber lasers for the existing and potential market.

laser-systems

A large number of laser diodes are used to generate inflated radiation for sending input to the optical fiber. The wavelength of the laser beam generated is restricted about 1070 μm with the help of an input – Bragg mirrors. This wavelength is approximately one-tenth of the volume of the wavelength of CO2 laser, which is largely used until today. The standard working life of the diodes is more than 100,000 hours. The generated laser beam is of extremely high quality with the wavelength of 1070 μm, and its divergence is approximately 8 [mm * mrad]. It also can be spread with the same quality up to a space of 50 [m].

The active fiber core has a minimum thickness - only a few micrometers. Transmission of the laser ray between the cutting head and the resonator is passed through the fiber. So, there is no need for mirrors, thus the regular costly replacement of the mirrors can also be avoided. Compared to the widely used CO2 laser, fiber laser generates ten times less wavelength and it makes possible to cut the materials efficiently. The laser beam with such kind of wavelength can absorb far better and allows you to cut the non-ferrous metals, like aluminum, brass, or copper. The capacity to focus the laser beam is enhanced, ensures a higher rate of cutting, low heat dissipation in the material, and the cut surface is also more smooth.

NF PRO Series

NF-PRO 420 SERIES

Standard Features:

  • The machine can be produced in the following working sheet sizes:
    • 2000x4000 mm
    • 2000x6000 mm
    • 2000x8000 mm
  • The fiber laser has a module structure. For example, if you want to change resonator type after a certain period, you can just do it by adding new modules.
  • The laser beam is relayed to the cutting head through fiber optic cable without any loss and thus, provides a superior cutting accuracy and quality.
  • A Convenient system for releasing slags and materials.
  • Automatic dual palette swaps hydraulic shuttle system.
  • Work area illumination for standard view.
  • With low power consumption, it is user-friendly as well as environment efficient.

NF-PRO 620 SERIES

Standard Features:

  • The machine can be produced in the following working sheet sizes:
    • 2000x6000 mm
    • 2000x8000 mm
  • The fiber laser has a module structure. For example, if you want to change resonator type after a certain period, you can just do it by adding new modules.
  • The laser beam is relayed to the cutting head through fiber optic cable without any loss, provides a superior cutting accuracy and quality.
  • A convenient system for releasing slags and materials.
  • Automatic dual palette swaps hydraulic shuttle system.
  • Work area illumination for standard view.
  • The main body is robust and rigid.
  • With low power consumption, it is user-friendly as well as environmentally efficient
vento_200w

NF-PRO VENTO SERIES

Standard Features:

  • The machine can be produced in the following working sheet sizes:
    • 1500x3000 mm
    • 2000x4000 mm
    • 2000x6000 mm
  • The fiber laser has a module structure. For example, if you want to change resonator type after a certain period, you can just do it by adding new modules. (ie; from 1kW resonator to 2kW resonator).
  • The laser beam is relayed to the cutting head through fiber optic cable without any loss. You can get a superior cutting accuracy and quality.
  • With low power consumption, it is user-friendly as well as environmentally efficient.
  • The main body is robust and rigid.
  • A convenient system for releasing slags and materials.
  • Automatic dual palette swaps hydraulic shuttle system.
  • Work area illumination for standard view.
  • Cutting of all related types – mild steel, copper, and aluminum and brass materials is possible.
  • ISO-9001 TSE and CE certified.

REX Series

rex_200w

REX PP 315 SERIES

Standard Features:

  • Pipe cutting: Appropriate for cutting engraving different types of metallic pipes and tubes; for instances, stainless steel, mild steel, carbon steel, alloy steel, silicon steel, galvanized steel, titanium etc. Great for advertising, decoration and other metal processing companies.
  • Auto detection: The angle and the corner of the sheet are traced and pointed automatically by the 3-point detection technique of the machine.
  • Blow Piercing: The machine can produce small piercing holes fast in mild steel up to a thickness of 16mm by the control of oxidation reaction and enhancement of beam quality.
  • Dust collection system: An automatic flap operates with the movement of the processing head to collect dust on the spot during the processing.
  • Crust Reduction Control: CR control of the machine reduces corner’s dross adhesion and facilitates high-speed processing and quality maintenance.

ECO Series

eco_200w

ECO S-LINE SERIES

Standard Features:

  • This machine can be operated with IPG 2000W or 1000 W resonators.
  • There is no mirror with this laser and also no optical element with the laser beam. With zero power loss, it is transported to the work area.
  • Nukon-Germany Bimo FSC is used with this machine which ensures easy operation as well as convenient maintenance.
  • The machine is very energy-efficient. Total power consumption is only 7kW.
  • Loading and offloading of the machine-parts is done by pallet changer table.
  • There is a system to illuminate the work area for convenience.
  • Work area remains enclosed and cutting process can be monitored through a special glass window.

X5 Series

5-Axis-_200

X5 SERIES

5 Axes Fiber Laser Cutting Machine Standard Features:

  • Installation Area: 6700mm x 7430mm x 3700mm 0N x L x H)
  • Working Range (x,y,z,) : 3000mm x 1300mm x 600mm
  • Rotary changer: 4000 mm
  • 2 and 3 kW laser power options.
  • 2 or 3 stations options.
  • The versatile laser cutting station NUKONX5 is developed for cutting wide variety of 3D forming parts by huge working space

Benefits of Fiber Laser Cutting Machines

There are a few types of laser cutting machines on the market, but fiber lasers come with a host of benefits unique to them. This is especially true for manufacturing purposes. Here are some of the advantages unique to a fiber laser.

Fiber lasers offer a measure of control that other machine tools just can’t match. You determine with utter precision the beam length, intensity, duration, heat output, etc., allowing for meticulously precise cuts.

Because of the exceptional level of control, fiber lasers are used in some capacity in a wide array of industries, including aerospace, automotive, battery, electronic, printing, solar, etc.

Fiber laser cutting machines are easy to set up and can be setup to run multiple functions. That’s because most of the laser processes (laser marking, laser engraving, laser cutting, laser drilling) are similar, making them easy to switch seamlessly.

Unlike many machine tools in general and other laser cutting machines specifically, fiber laser cutting machines require very little maintenance. That’s because they use a “fit and forget” technology. But even when they do require maintenance service, it tends to be less expensive than for other laser cutting machines.

Unlike other laser machines, fiber laser cutters are built with more modern cooling systems, ensuring an even heat distribution and a lower overall heat output.

sheet_laser_cut_2_(1)

Additional Products

Let Moore Machine Tools Earn Your Trust

Let’s be real. You can find dozens of laser cutting machines online or through your manufacturer liaison. It’s not hard to find just any laser cutting machine that may work or may not work. However, what’s more difficult is finding a laser machine for sale that adds more benefits and value than shown on the price tag. This is how Moore Machine Tool earns your trust. We work hard to deliver on our promises, and we offer more to you than any other company selling laser metal cutting machines on the market.

Don’t believe us? Take a look below at the ways we will work to earn your trust. And when you choose Moore Machine Tools, you get more than a laser machine. You get a business partner, too.

NF-Pro-315-vento

#1. Technological Partners

Moore Machine Tools is more than a laser metal cutting machine vendor and sales company. We actively seek out and partner with companies all around the world to better deliver on our promise: high quality equipment for affordable prices. Our partners allow us to stay ahead of the curve with technology and market needs. We don’t focus on selling you just any laser machine for sale. We work to get you the proper laser machine to fit into your operation. There’s no more calling dozens of vendors to get a quote on a single type of machine. We offer various brands, styles, types, functions, and more all at various price points.

#2. Laser Machine Experts

Many other vendors and manufacturers simply sell laser metal cutting machines. That’s all they do. Moore Machine Tools, on the other hand, has first-hand experience in the industry operating laser CNC machines on a daily basis. Our sales team isn’t here just to hit their numbers. They genuinely care that you get the proper machine for your operation. Our team sets itself apart based on their real world experience, not just because they’re smooth talkers. If you want to buy from a company that knows what they’re talking about, trust Moore Machine Tools.

#1. Technological Partners

Moore Machine Tools is more than a laser metal cutting machine vendor and sales company. We actively seek out and partner with companies all around the world to better deliver on our promise: high quality equipment for affordable prices. Our partners allow us to stay ahead of the curve with technology and market needs. We don’t focus on selling you just any laser machine for sale. We work to get you the proper laser machine to fit into your operation. There’s no more calling dozens of vendors to get a quote on a single type of machine. We offer various brands, styles, types, functions, and more all at various price points.

9 Questions to Ask Before Buying a Laser Metal Cutting Machine

You’re ready to buy a laser metal cutting machine. You want to get a machine that fits your operation and needs. And you’re in need of a machine that fits within your budget.

Part of this exciting process is to make sure the machine and the features of the machine will work for you. And this is one of the most important pieces to getting the best laser machine for sale. Here are the questions to ask before buying your next laser metal cutting machine:

How Much Space Do I Need?

Depending on which laser metal cutting machine you purchase, you will need to determine the space it needs to actually function. It can be tempting to go buy a new laser machine for sale, but you want to make sure it fits in your building or warehouse before you invest in a new machine. Who knows, you may be able to buy two laser machines with the amount of space you have.

What’s The Laser Machine’s Learning Curve?

You and every other industry professional has used laser metal cutting machine at some point or another. But, it’s important to ask about how the laser machine actually functions from an operator’s standpoint. You probably know how a laser cuts metal, but do you know how the model you’re considering buying allows the operator to interact with it?

What Materials Will I Need to Cut?

 It’s important you know which materials you’re going to need to use the laser on to get the best laser cutting machine for you. There are dozens of materials that you can mark or cut with a laser. The type of material is going to determine the strength of laser you need to get the job done right. A weak laser on a tough material will either taker forever to cut or won’t cut it. Know your material to buy the best laser machine.

What Size Laser Machine Do I Need?

Now, it’s time to ask what size of laser metal cutting machine do you actually need to operate your business. You may need a larger machine but don't have the space for it. Or, you have space for two machines, which means you can double production. Make sure you know what size laser machine you need for the size and type of materials you’ll be handling.

What Laser Strength Should I Get?

As mentioned in point #3, make sure you define the level of laser strength you need to actually cut through your working materials. Tough materials tend to need powerful lasers to cut through. If you get the wrong laser power, you may find yourself taking longer than necessary to cut materials, or you will not be able to cut the materials you need to work on. This is an important question to ask yourself.

How Will I Pay for It?

If you’re aware of a budget you need to fit your laser metal cutting machine into, then use that as a guide. It’s best to know how you plan on paying for your laser CNC machine before you start shopping. This way if you find the machine that fits your needs, you can move forward with buying it. There are various payment options: Cash • Credit Card • Lease-to-own • Bank loan

How Will You Use Your Laser Machine to Make Money?

You’d be surprised at how many people intend to buy a laser metal cutting machine without using it to make money. It’s important to know how you can use it the day it’s ready to go so that you can make money and grow your business. If you don’t know how you’ll use it yet, give yourself some time to figure that out before you start shopping.

What Kind of Laser Machine Warranties Are Available?

Many companies state they have the longest laser machine warranty, but it’s not always true. Typically, the manufacturer of the machine offers a warranty that you can leverage. In some cases, companies that sell laser metal cutting machines offer warranties on top of what the manufacturer offers, which makes it buying from these companies more lucrative.

Do You Offer Training With The New Laser Machine?

If you’re getting a new brand or style of laser cutting machine, you may want to get some introductory training on the operation of the given machine. This is a great question to ask so that you can get the training you need to operate the laser CNC machine properly without costing you more in materials or repairs if you accidentally damage anything.

Remember, your laser metal cutting machines should not be a one-size-fits-all solution. You’re paying to get the best laser CNC machine on the market. It needs to be able to fulfill your operation needs, as well as fit within your budget. It’s time to give Moore Machine Tools a call if you’re interested in getting more information on our range of laser CNC machines.

REQUEST A QUOTE